1350 Aluminum Sheet Plate Anodizing Good Insulation Material Width 100mm to 2650mm

Description
The content of 1350 aluminum is 99.50%, 1350 aluminum is not an alloy. It cannot be strengthed by heat treatment. Some details are in below list.

Anodizing
Aluminum and aluminium alloys can form a layer of oxide film naturally in the atmosphere, but the film is thin, porous, amorphous, non-uniform and discontinuous, which can not be used as a reliable protective - decorative film.
The thickness of the oxide film obtained by anodic oxidation is generally 5-20 microns, and the thickness of the hard anodic oxide film can reach 60-2500 microns. The film also has the following characteristics.

1.Higher hardness

The hardness of pure aluminium oxide film is higher than that of aluminium alloy oxide film. Usually, the hardness of pure aluminium oxide film is related to the composition of aluminium alloy and the technological conditions of electrolyte during anodic oxidation.

2.Higher corrosion resistance

This is due to the high chemical stability of the anodic oxide film. The anodic oxide film of pure aluminium has better corrosion resistance than that of aluminium alloy. This is due to the inclusion of alloy components or the formation of metal compounds that can not be oxidized or dissolved, resulting in discontinuity or voids in the oxide film, thus greatly reducing the corrosion resistance of the oxide film. Therefore, in order to improve its corrosion resistance, the oxide film formed by anodic oxidation must be sealed.

3.Strong adsorption capacity
The anodic oxide film of aluminium and its alloys is porous structure and has strong adsorption capacity. Therefore, filling various pigments, lubricants and resins in the hole can improve the protection, insulation, wear resistance and decoration performance of aluminium products.

4.Good insulation performance
Because it does not possess the conductive properties of metals, it becomes a good insulating material.

5.Strong thermal insulation and resistance
The thermal conductivity of anodic oxide film of aluminium and its alloys is much lower than that of pure aluminium, and its temperature resistance is about 1500 degrees Celsius, while that of pure aluminium is only 660 degrees Celsius.



Application Examples and Packing

Rising International was established in 2003 with a registered capital of USD 25 million. For more than 15 years, Rising International has been recognized as a trusted partner and innovative aluminium producer and supplier at home and aboard, with a broad portfolio of quality aluminum products for the packaging, electronics, automotive and transport, building and construction, shipbuilding, automotive, energy, industrial, HVAC and Solar markets. Products cover primary aluminum in the form of ingots, value-added products such as rolled products, extrusions and foils.

Rising International exports approximately 60% of its production to more than 30 countries and offers reliable and competitive solutions that meet the requirements of the most demanding global customers. Rising International is committed to strengthening the viability of its customers and communities, shaping a sustainable future through innovative aluminium solutions.

Rising International enjoys a leadership position in aluminium and downstream value-added products in China.  Rising International will continue to be down-to-earth, actively explore and continue to promote the company's strategy of diversification and professionalism.